2
Hardware Installation
This chapter shows you how to install the switch.
"Do NOT block the ventilation holes. Leave space between devices when stacking.
For proper ventilation, allow at least 4 inches (10 cm) of clearance at the front and 3.4 inches (8 cm) at the back of the switch. This is especially important for enclosed rack installations.
2.1Mounting the Switch on a Rack
This section lists the rack mounting requirements and precautions and describes the installation steps.
2.1.1Rack-mounted Installation Requirements
•Two mounting brackets.
•Eight M3 flat head screws and a #2 Philips screwdriver.
•Four M5 flat head screws and a #2 Philips screwdriver.
"Failure to use the proper screws may damage the unit.
2.1.1.1Precautions
•Make sure the rack will safely support the combined weight of all the equipment it contains.
•Make sure the position of the switch does not make the rack unstable or
| 35 |
|
|