Chapter 4 The Web Configurator

 

Table 5 Navigation Panel Links (continued)

 

LINK

DESCRIPTION

 

 

VDSL Alarm

This link takes you to a screen where you can configure VDSL alarm profiles to

 

 

Profile Setup

apply to the VDSL lines.

 

 

 

 

 

 

VDSL PSD

This link takes you to a screen where you can configure VDSL PSD profiles to

 

 

Profile Setup

apply to the VDSL lines.

 

 

 

 

 

 

Advanced Application

 

 

 

 

 

 

VLAN

This link takes you to screens where you can configure port-based or 802.1Q

 

 

 

VLAN (depending on what you configured in the Switch Setup screen).

 

 

 

 

 

 

Static MAC

This link takes you to screens where you can configure static MAC addresses for a

 

 

Forwarding

port. These static MAC addresses do not age out.

 

 

 

 

 

 

Filtering

This link takes you to a screen to set up filtering rules.

 

 

 

 

 

 

Spanning Tree

This link takes you to screens where you can configure the STP/RSTP to prevent

 

 

Protocol

network loops.

 

 

 

 

 

 

Bandwidth

This link takes you to screens where you can cap the maximum bandwidth allowed

 

 

Control

from specified source(s) to specified destination(s).

 

 

 

 

 

 

Broadcast Storm

This link takes you to a screen to set up broadcast filters.

 

 

Control

 

 

 

 

 

 

 

Mirroring

This link takes you to screens where you can copy traffic from one port or ports to

 

 

 

another port in order that you can examine the traffic from the first port without

 

 

 

interference

 

 

 

 

 

 

Link Aggregation

This link takes you to a screen where you can logically aggregate physical links to

 

 

 

form one logical, higher-bandwidth link.

 

 

 

 

 

 

Port

This link takes you to a screen where you can configure RADIUS (Remote

 

 

Authentication

Authentication Dial-In User Service), a protocol for user authentication that allows

 

 

 

you to use an external server to validate an unlimited number of users.

 

 

 

 

 

 

Port Security

This link takes you to a screen where you can activate MAC address learning and

 

 

 

set the maximum number of MAC addresses to learn on a port.

 

 

 

 

 

 

Queuing Method

This link takes you to a screen where you can configure SPQ or WFQ with

 

 

 

associated queue weights for each port.

 

 

 

 

 

 

Classifier

This link takes you to a screen where you can configure the switch to group

 

 

 

packets based on the specified criteria.

 

 

 

 

 

 

Policy Rule

This link takes you to a screen where you can define actions on classified traffic

 

 

 

flows.

 

 

 

 

 

 

VLAN Stacking

This link takes you to a screen where you can configure VLAN stacking.

 

 

 

 

 

 

Multicast

This link takes you to screens where you can configure multicast functions (such as

 

 

 

IGMP) on the switch.

 

 

 

 

 

 

MVR

This link takes you to screens where you can configure MVR (Multicast VLAN

 

 

 

Registration).

 

 

 

 

 

 

DiffServ

This link takes you to screens where you can enable DiffServ, configure marking

 

 

 

rules and set DSCP-to-IEEE802.1p mappings.

 

 

 

 

 

 

Routing Protocol

 

 

 

 

 

 

 

Static Routing

This link takes you to screens where you can configure static routes. A static route

 

 

 

defines how the switch should forward traffic by configuring the TCP/IP parameters

 

 

 

manually.

 

 

 

 

 

 

DHCP Relay

This link takes you to a screen where you can configure the DHCP relay settings for

 

 

 

the network on the switch.

 

 

 

 

 

 

Management

 

 

 

 

 

 

 

49

VES-1616F-3x Series User’s Guide