25
Maintenance
This chapter explains how to configure the maintenance screens that let you maintain the firmware and configuration files.
25.1 The Maintenance Screen
The maintenance screens can allow you to upload new firmware (to the switch), manage configuration, reset to factory defaults and restart your switch.
Click Management > Maintenance in the navigation panel to open the screen as shown next.
Figure 72 Maintenance
The following table describes the links in this screen.
Table 58 Maintenance
LINK | DESCRIPTION |
Remote Device | Access this screen to perform remote firmware upgrade on the connected non- |
Upgrade | manageble CPE device(s). |
|
|
VDSL Chip Reset | Access this screen to reset the VDSL chip(s) on this switch. |
|
|
Remote Device | Access this screen to reset the VDSL link(s) to the CPE device(s). |
Reset |
|
|
|
Firmware Upgrade | Access this screen to upload a new firmware to this switch. |
|
|
Restore | Access this screen to upload a previously saved configuration file to the switch. |
Configuration |
|
|
|
Backup | Access this screen to back up the current switch configuration. |
Configuration |
|
|
|
| 169 |
|
|