Chapter 25 Maintenance
2Click OK to display the screen shown next.
Figure 76 Reboot System: Start
3Click OK again and then wait for the switch to restart. This takes up to two minutes. This does not affect the switch’s configuration.
25.4Remote Device Upgrade
The switch allows you to perform remote firmware upgrade on the connected CPE device(s).
Click Management and Maintenance, then click the Click Here link next to Remote Device Upgrade to display the screen as shown next.
"Be sure to upload the correct model firmware as uploading the wrong model firmware may damage the device.
Figure 77 Maintenance: Remote Device Upgrade
Follow the steps below to perform remote firmware upgrade on the CPE devices connected to the switch.
1Download the latest firmware for the CPE device from www.zyxel.com and save it on a computer connected to the switch.
| 171 |
|
|