Chapter 6 Basic Setting
Figure 19 System Info
The following table describes the labels in this screen.
Table 9 System Info
LABEL | DESCRIPTION |
System Name | This field displays the descriptive name of the switch for identification purposes. |
|
|
OS F/W | This field displays the version number of the switch 's current firmware including the |
Version | date created. |
|
|
Modem Code | This field displays the version number of the switch 's current VDSL modem code |
F/W Version | version. |
|
|
Ethernet | This field refers to the Ethernet MAC (Media Access Control) address of the switch. |
Address |
|
|
|
Hardware Monitor | |
|
|
Temperature | The switch has temperature sensors that are capable of detecting and reporting if the |
Unit | temperature rises above the threshold. You may choose the temperature unit |
| (Centigrade or Fahrenheit) in this field. |
|
|
Temperature | IFE8, Switch and ADT7463 refer to the location of the temperature sensors on the |
| circuit board. |
|
|
Current | This shows the current temperature in degrees centigrade at this sensor. |
|
|
MAX | This field displays the maximum temperature measured at this sensor. |
|
|
MIN | This field displays the minimum temperature measured at this sensor. |
|
|
Threshold | This field displays the upper temperature limit at this sensor. |
|
|
Status | This field displays Normal for temperatures below the threshold and Error for those |
| above. |
| If Error displays, check that the fans are working and make sure that you do not |
| block ventilation holes on the switch. |
|
|
Fan Speed | A properly functioning fan is an essential component (along with a sufficiently |
(RPM) | ventilated, cool operating environment) in order for the device to stay within the |
| temperature threshold. Each fan has a sensor that is capable of detecting and |
| reporting if the fan speed falls below the threshold shown. |
|
|
64 |
| |
| ||
|
|
|