Chapter 33 Command Examples
This command shows the general system information (such as the firmware version and system up time). An example is shown next.
sysname# show
System Name | : | |
System Contact | : |
|
System Location | : |
|
Ethernet Address | : 00:13:49:00:00:02 | |
ZyNOS F/W Version | : V3.60(AIH.0)C0 01/25/2007 | |
RomRasSize | : 3364912 | |
System up Time | : | 0:28:28 (29b44 ticks) |
Bootbase Version | : V0.1 06/05/2006 | |
ZyNOS CODE | : RAS Jan 19 2007 19:22:28 | |
Product Model | : | |
sysname# |
|
|
Syntax:
show
This command displays a summary list of VDSL alarm profiles or displays the settings of a VDSL alarm profile. The following example shows the summary table.
sysname# show |
|
|
|
| |
Name | LOSs | ESs | SESs | InitFailure | Applied Ports |
====================================================================== | |||||
DEFVAL | 0 | 0 | 0 | Off |
sysname#
The following example shows the settings of the test alarm profile.
sysname# | show |
|
Profile Name | : test | |
15Mins | LOSs Threshold | : 15 |
15Mins | ESs Threshold | : 10 |
15Mins | SESs Threshold | : 5 |
Initialization Failure | : On | |
sysname# |
|
|
Syntax:
show
246 |
| |
| ||
|
|
|