Chapter 25 Maintenance
2In the Remote Device Upgrade screen, select the VDSL line(s) of the CPE device(s) to which you want to upgrade the firmware. You can select multiple CPE devices by holding down the [SHIFT] or [CTRL] key and clicking the mouse at the same time.
3Type the path and file name of the firmware file you wish to upload to the switch in the File Path text box or click Browse to locate it.
4After you have specified the file, click Upgrade.
25.5VDSL Chip Reset
There are four VDSL chips in the switch and each VDSL chip controls four VDSL ports. You can reset the VDSL chip(s) using the VDSL Chip Reset screen.
"
"
Resetting VDSL chip(s) disconnects the associated VDSL line(s).
Resetting the VDSL chip(s) does NOT restart the switch.
Follow the steps below to reset VDSL chips in the switch.
1Access the VDSL Chip Reset screen from the Maintenance screen.
Figure 78 Maintenance: VDSL Chip Reset
2Select the VDSL chips you want to reset in the list box. You can select multiple entries by holding down the [SHIFT] or [CTRL] key.
3Click Reset to reset the selected VDSL chip(s).
25.6Remote Device Reset
Use the Remote Device Reset screen to reset the VDSL line. The switch
172 |
| |
| ||
|
|
|