Chapter 3 Hardware Overview
Figure 6 Transceiver Installation Example
2Press the transceiver firmly until it clicks into place.
3The switch automatically detects the installed transceiver. Check the LEDs to verify that it is functioning properly.
Figure 7 Installed Transceiver
3.1.3.2 Transceiver Removal
Use the following steps to remove a mini GBIC transceiver (SFP module).
1Open the transceiver’s latch (latch styles vary).
Figure 8 Opening the Transceiver’s Latch Example
2Pull the transceiver out of the slot.
Figure 9 Transceiver Removal Example
3.1.4 Console PortFor local management, you can use a computer with terminal emulation software configured to the following parameters:
| 39 |
|
|