Chapter 21 Multicast
Configure MVR IP multicast group address(es) in the Group Configuration screen. Click Group Configuration in the MVR screen.
"A port can belong to more than one multicast VLAN. However, IP multicast group addresses in different multicast VLANs cannot overlap.
Figure 62 MVR > Group Configuration
The following table describes the labels in this screen.
Table 52 MVR > Group Configuration
LABEL | DESCRIPTION |
Multicast | Select a multicast VLAN ID (that you configured in the MVR screen) from the drop- |
VLAN ID | down list box. |
|
|
Name | Enter a descriptive name for identification purposes. |
|
|
Start Address | Enter the starting IP multicast address of the multicast group in dotted decimal |
| notation. |
| Refer to Section 21.1.1 on page 145 for more information on IP multicast addresses. |
|
|
End Address | Enter the ending IP multicast address of the multicast group in dotted decimal |
| notation. |
| Enter the same IP address as the Start Address field if you want to configure only one |
| IP address for a multicast group. |
| Refer to Section 21.1.1 on page 145 for more information on IP multicast addresses. |
|
|
Add | Click Add to save the settings. |
|
|
Cancel | Click Cancel to discard all changes. |
|
|
MVLAN | This field displays the multicast VLAN ID. |
|
|
Name | This field displays the descriptive name for this setting. |
|
|
Start Address | This field displays the starting IP address of the multicast group. |
|
|
End Address | This field displays the ending IP address of the multicast group. |
|
|
Delete | Select Delete All and click Delete to remove all entries from the table. |
| Select Delete Group and click Delete to remove the selected entry(ies) from the table. |
|
|
Cancel | Select Cancel to clear the checkbox(es) in the table. |
|
|
| 153 |
|
|