Chapter 32 Introducing the Commands

32.2.2.1 Initial Screen

When you turn on your switch, it performs several internal tests as well as line initialization. You can view the initialization information using the console port. After the initialization, the login screen displays (refer to Section 32.3 on page 212).

Copyright (c) 1994 - 2006 ZyXEL Communications Corp. initialize mgmt, ethernet address: 00:13:49:01:23:45 initialize switch, ethernet address: 00:13:49:01:23:46 Initializing switch unit 0...

Press ENTER to continue...

32.2.3 Telnet

Use the following steps to telnet into your switch.

1For local management, connect your computer to the RJ-45 management port (labeled MGMT) on the switch.

2Make sure your computer IP address and the switch IP address are on the same subnet. In Windows, click Start (usually in the bottom left corner), Run and then type telnet 192.168.0.1 (the default management IP address) and click OK.

3A login screen displays.

 

211

VES-1616F-3x Series User’s Guide