Chapter 14 Link Aggregation
14.1.2 Link Aggregation ID
LACP aggregation ID consists of the following information1:
Table 31 | Link Aggregation ID: Local Switch |
|
| ||
SYSTEM PRIORITY | MAC ADDRESS | KEY | PORT PRIORITY | PORT NUMBER | |
0000 |
| 0000 | 00 | 0000 | |
|
|
|
|
|
|
Table 32 | Link Aggregation ID: Peer Switch |
|
| ||
SYSTEM PRIORITY | MAC ADDRESS | KEY | PORT PRIORITY | PORT NUMBER | |
0000 |
| 0000 | 00 | 0000 | |
|
|
|
|
|
|
14.2 Link Aggregation Status
Click Advanced Application > Link Aggregation in the navigation panel. The Link Aggregation Control Protocol Status screen displays by default.
This screen displays LACP group aggregator ID, member port number(s) and the group status.
Figure 42 Link Aggregation Control Protocol Status
The following table describes the labels in this screen.
Table 33 Link Aggregation Control Protocol Status
LABEL | DESCRIPTION |
Index | This field displays the trunk ID to identify a trunk group, that is, one logical link |
| containing multiple ports. |
|
|
Aggregator ID | This field displays the link aggregation ID. Link aggregation ID consists of the |
| following: system priority, MAC address, key, port priority and port number. |
| Refer to Section 14.1.2 on page 114 for more information on this field. |
|
|
Enabled Ports | These are the ports you have configured in the Link Aggregation screen to be in the |
| trunk group. |
|
|
Synchronized | These are the ports that are currently transmitting data as one logical link in this trunk |
Ports | group. |
|
|
1.Port Priority and Port Number are 0 as it is the aggregator ID for the trunk group, not the individual port.
114 |
| |
| ||
|
|
|