Chapter 15 Port Authentication
Figure 45 Port Authentication
15.2.1 Activate IEEE 802.1x SecurityFrom the Port Authentication screen, display the configuration screen as shown. See Section 15.1 on page 117 for background information.
Figure 46 Port Authentication > 802.1x
The following table describes the labels in this screen.
Table 35 Port Authentication > 802.1x
LABEL | DESCRIPTION |
Active | Select this check box to permit 802.1x authentication on the switch. |
| Note: You must first enable 802.1x authentication on the switch |
| before configuring it on each port. |
|
|
Port | This field displays a port number. |
|
|
Active | Select this checkbox to permit 802.1x authentication on this port. You must first |
| allow 802.1x authentication on the switch before configuring it on each port. |
|
|
Reauthenticatio | Specify if a subscriber has to periodically |
n | password to stay connected to the port. |
|
|
Reauthenticatio | Specify how often a client has to |
n Timer | connected to the port. |
| It is recommended that you enter a number more than 60 seconds. The valid range |
| is between 1 and 65535 seconds. |
|
|
Apply | Click Apply to save your changes back to the switch. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
118 |
| |
| ||
|
|
|