33
Command Examples
This chapter describes some commands in more detail.
33.1 Overview
These are commands that you may use frequently in maintaining your switch.
33.2 show Commands
These are the commonly used show commands.
33.2.1 show interface
Syntax:
show interface
This command displays statistics of a port. The following example shows that port 2 is up and the related information.
sysname# show interface 2 | :2 | |
Port Info | Port NO. | |
| Link | :100M/F |
| Status | :FORWARDING |
| LACP | :Disabled |
| TxPkts | :0 |
[Snip] | ||
| LPRs | :0 / 0 |
| C15MinsTimeElapsed | :0 / 0 |
| Curr15MinLofs | :0 / 0 |
| Curr15MinLoss | :0 / 0 |
| Curr15MinLols | :0 / 0 |
| Curr15MinLprs | :0 / 0 |
| C1DayTimeElapsed | :0 / 1 |
| Curr1DayLofs | :1 / 0 |
| Curr1DayLoss | :0 / 0 |
| Curr1DayLols | :0 / 0 |
sysname# | Curr1DayLprs | :0 / 0 |
|
|
| 243 |
|
|