Chapter 7 VLAN
Table 19 | VLAN > Static VLAN (continued) | |
LABEL |
| DESCRIPTION |
Cancel |
| Click Cancel to reset the fields. |
|
|
|
Clear |
| Click Clear to start configuring the screen again. |
|
|
|
VID |
| This field displays the ID number of the VLAN group. Click the number to edit the |
|
| VLAN settings. |
|
|
|
Active |
| This field indicates whether the VLAN settings are enabled (Yes) or disabled (No). |
|
|
|
Name |
| This field displays the descriptive name for this VLAN group. |
|
|
|
Delete |
| Click Delete to remove the selected entry from the summary table. |
|
|
|
Cancel |
| Click Cancel to clear the Delete check boxes. |
|
|
|
To configure the VLAN settings on a port, click the VLAN Port Setting link in the VLAN Status screen. Refer to Section 7.1 on page 87 for background information.
Figure 32 VLAN > VLAN Port Setting
The following table describes the labels in this screen.
Table 20 VLAN > VLAN Port Setting
label | description |
GVRP | GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a |
| way for switches to register necessary VLAN members on ports across the |
| network. |
| Select this check box to permit VLAN groups beyond the local switch. |
|
|
Port Isolation | Port Isolation allows each port to communicate only with the CPU management |
| port and the uplink ports but not communicate with each other. This option is the |
| most limiting but also the most secure. |
|
|
Port | This field displays the port number. |
|
|
Ingress Check | Select this check box to discard incoming frames for VLANs that do not have this |
| port as a member. |
| Clear this check box to disable ingress filtering. |
|
|
PVID | Enter a number between 1and 4094 as the port VLAN ID. |
|
|
92 |
| |
| ||
|
|
|