Chapter 21 Multicast

Without IGMP snooping, multicast traffic is treated in the same manner as broadcast traffic, you can configure the switch to forward or discard unknown multicast group traffic. With IGMP snooping, group multicast traffic is only forwarded to ports that are members of that group. IGMP snooping generates no additional network traffic, allowing you to significantly reduce multicast traffic passing through your switch.

21.2 Multicast Status

Click Advanced Application > Multicast to display the screen as shown. This screen shows the multicast group information. Refer to Section 21.1 on page 145 for more information on multicast.

Figure 56 Multicast Status .

The following table describes the labels in this screen.

Table 48 Multicast Status

LABEL

DESCRIPTION

Index

This is the index number of the entry.

 

 

VID

This field displays the multicast VLAN ID.

 

 

Port

This field displays the port number that belongs to the multicast group.

 

 

Multicast Group

This field displays IP multicast group addresses.

 

 

21.3 Multicast Setup

Click Advanced Application > Multicast to display the screen as shown. Use this screen to enable and configure multicast settings on the switch and apply IGMP profiles to ports.

See Section 21.1 on page 145 for background information.

146

 

VES-1616F-3x Series User’s Guide