Chapter 29 Cluster Management
29.2 Cluster Management Status
Click Management > Cluster Management in the navigation panel to display the following screen.
"A cluster can only have one manager.
Figure 101 Cluster Management Status
The following table describes the labels in this screen.
Table 73 Cluster Management Status
LABEL | DESCRIPTION |
Status | This field displays the role of this switch within the cluster. |
| Manager |
| Member (you see this if you access this screen in the cluster member switch directly |
| and not via the cluster manager) |
| None (neither a manager nor a member of a cluster) |
|
|
Manager | This field displays the cluster manager switch’s hardware MAC address. |
|
|
The Number of | This field displays the number of switches that make up this cluster. The following |
Member | fields describe the cluster member switches. |
|
|
Index | You can manage cluster member switches via the cluster manager switch. Each |
| number in the Index column is a hyperlink leading to the cluster member switch’s web |
| configurator (see Figure 102 on page 199). |
|
|
MacAddr | This is the cluster member switch’s hardware MAC address. |
|
|
Name | This is the cluster member switch’s System Name. |
|
|
Model | This field displays the model name. |
|
|
Status | This field displays: |
| Online (the cluster member switch is accessible) |
| Error (for example the cluster member switch password was changed or the switch |
| was set as the manager and so left the member list, etc.) |
| Offline (the switch is disconnected - Offline shows approximately 1.5 minutes after |
| the link between cluster member and manager goes down) |
|
|
198 |
| |
| ||
|
|
|