Chapter 2 Hardware Installation
1Position a mounting bracket on one side of the switch, lining up the four screw holes on the bracket with the screw holes on the side of the switch.
Figure 3 Attaching the Mounting Brackets
2Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting bracket holes into the switch.
3Repeat steps 1 and 2 to install the second mounting bracket on the other side of the switch.
4You may now mount the switch on a rack. Proceed to the next section.
2.1.3Mounting the Switch on a Rack1Position a mounting bracket (that is already attached to the switch) on one side of the rack, lining up the two screw holes on the bracket with the screw holes on the side of the rack.
Figure 4 Mounting the Switch on a Rack
2Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting bracket holes into the rack.
3Repeat steps 1 and 2 to attach the second mounting bracket on the other side of the rack.
36 |
| |
| ||
|
|
|