Administration procedures

How to administer Dynamic Queue Position

To administer Dynamic Queue Position:

1.At the command line prompt of your SAT or terminal emulator, enter: change hunt-groupxxx

where xxx is the number of the skill to which calls will be queued.

2.Press Return.

3.Go to page 2 of the Hunt Group form.

4.Enter y in the Dynamic Queue Position? field.

5.Press Enter to save your changes.

How to administer a Service Objective for a VDN

To administer a service objective for a VDN:

1.At the command line prompt of your SAT or terminal emulator, enter: change vdn xxxx

where xxxx is the number of the VDN for which you want to activate Dynamic Queue Position.

2.Press Return.

3.In the Service Objective(sec): field, enter your target objective in seconds.

4.Press Enter to save your changes.

Administering Service Level Supervisor

Service Level Supervisor automatically manages agents during periods of peak loads by activating reserve agents or activating Call Selection Override when predefined thresholds are exceeded. Dynamic Threshold Adjustment works with Service Level Supervisor to automatically adjust your thresholds as needed to activate reserve agents to help meet your administered service level goals. See Service Level Supervisor on page 86 for more information about how this feature works.

This section includes the following topics:

Where is Service Level Supervisor administered? on page 104

How to administer Service Level Supervisor for a skill on page 104

How to administer a Reserve Agent on page 105

How to administer Call Selection Override system wide on page 106

Avaya Business Advocate User Guide

February 2006 103

Page 103
Image 103
Avaya 3.1 manual Administering Service Level Supervisor, How to administer Dynamic Queue Position