Adding labels to a label set

You create labels individually when you are making a set, but after the initial label, you use the Add Label function to create the next label. The system then assumes you are making a set of labels and adjusts the process accordingly, with some differences for custom-created labels and those you create using pre-designed templates.

Adding custom labels

To create a set of custom labels

1.Create the first label in the set.

2.When it is complete and displayed in the Editor window, press <Add Label>. You do not have to close the initial label first or do anything to save it. The system automatically stores it in a temporary location.

Note: The label is saved only temporarily. If you don’t save it as a file at the end of the editing session, it will be discarded when you close the Editor window.

You’ll see a new blank label in the Editor window, and the status bar displays the message:

Label 2 of 2.

3.Repeat the process for as many labels as you need in the set.

4.When the set is complete, choose Print. See Printing labels in a label set on page 11-6 for further instructions.

Adding template labels

To create a set of standardized template labels

1.Create the first label in the set.

2.When it is complete and displayed in the Editor window, press <Add Label>.

3.You’ll see the Template Categories screen, where you can begin the process again by selecting a template again. Select the same template or a different on.

6-22°Creating Sets of Labels

Page 108
Image 108
Brady label maker manual Adding labels to a label set, Adding custom labels, Adding template labels