If you add or remove objects from the label, the system does not automatically resize a frame. To resize the frame, you must remove the existing frame and add a new one.

Setting Application Preferences

Application Preferences settings are very similar to System Setup settings (described in CHAPTER 5: Setting Preferences, beginning on page 5-1). In some applications, the Application Preferences screens allow you to set application-specific preferences that apply to the application only. In most cases, however, the Application Preferences tabs provide system-wide settings. In fact, several Application Preferences tabs are identical to those that appear on the System Setup screen.

Important! When you make a change to Application Preferences or System Setup options, that change is in effect for all labels you create from that point on, until you change the settings again.

Some templates, particularly those in the Pipe Marker and Right-to- Know applications, contain instructions telling them to override preferences you may try to set. This is to maintain the integrity of the templates, some of which are designed to comply with federal regulations.

Accessing Application Preferences screens

Press the <Preference> key while inside a label you are creating or one you have previously created. You’ll see the Application Preferences screen appropriate for the application in which you are working. This

Working with Labels °6-35

Page 121
Image 121
Brady label maker manual Setting Application Preferences, Accessing Application Preferences screens