
Landscape | Sets the label to print in Landscape mode, |
| where the height of the label is the width of |
| the tape supply. This is the default. |
|
|
Portrait | Sets the label to print in Portrait mode, |
| where the width of the label is the width of |
| the tape supply. |
|
|
Choose OK when your settings are complete. If your label width is larger than the printable area of your tape supply, the system displays a message that provides the maximum size you can use.
Choose Cancel to return to the Editor window without making changes to the label.
Adding a label frame
You can add a frame around the edge of a label in the shape of a rectangle or a rectangle with rounded corners. This is a sample label with a rounded rectangle frame added:
Figure 6-15. A sample label with a frame.
You can make the frame line thick or thin, and if you have the Multicolor or Color & Cut system, you can set a color for the line. If you have the Color & Cut system, you can also cut out the label around the frame boundaries. See Cutting Around Label Frames on page