The General tab options are:
Rotation | For all systems. Use the scroll arrows to |
| choose from the list of rotation angles. For |
| example, to rotate an object 45 degrees, |
| choose 45. |
| Note: For bar code objects, the only valid |
| values are 0 and 90 degrees. |
| After rotating an object, you may not set an |
| absolute size for that object. You may, |
| however, use the Increase Size and |
| Decrease Size tools to change the size. (See |
| Using Increase Size and Decrease |
| Size on page |
|
|
No fill/Solid fill | These options appear on the HotShape |
| Properties General tab only. Select to set the |
| default fill for the HotShape object. The fill |
| is the background pattern inside the object. |
| Choose: |
| • No fill to leave objects transparent. |
| • Solid fill to make the background inside |
| the object a solid color. |
|
|
Print/Cut out | For the Color & Cut system only. Set to |
| indicate that the object is for printing or to |
| be cut out. In the Monocolor and Multicolor |
| systems, print object is the only option. See |
| Creating Cut Out Objects on page |
| complete information. |
|
|
Cut bounding | For the Color & Cut system only. Use to |
box | apply a bounding box to a print object, so the |
| object can be cut out. See Cutting Around |
| Objects on page |
|
|
Weeding | For the Color & Cut system only. Use to |
| apply a cut around the outside of a cut text |
| object. You can then strip the waste from |
| around the text. See Weeding cut out text |
| objects on page |
|
|
Working with