
Step 3: Carefully pull on the blade to remove it, as shown here:
Figure B-6. Removing the blade.
CAUTION: Be careful to grasp the blade on the shank, and not on the cutting edge.
If the blade does not remove easily, you may need to remove the screw that holds the blade stylus in place, as shown here:
Use screw driver to remove screw to release stylus blade (if necessary)
Figure B-7. Stylus screw adjustment
If the blade still does not remove easily, insert the screwdriver or other appropriate implement into the screw hole and push the blade out
Step 4: Insert the new blade. If you removed the screw, tighten it or replace it.