Brady label maker manual Creating Cut Out Objects, Adding cut out objects

Creating Cut Out Objects

You create cut out objects by adding them to a label, the same way you create and add print objects. Once you choose the Cut out object option, your other choices are limited, however, to objects that may be cut out. See Table 10-1 for a list of those objects

Also, not all tape supplies are appropriate for cutting. If the cutter cannot use the tape installed in your printer, the Cut out option on the Insert Object screen will be grayed out.

Adding cut out objects

When you add objects to your label, the Insert Object screen gives you the choice to insert a Print object or a Cut out object, as shown here:

Figure 10-1. The Insert Object screen on the Color & Cut system.

If you choose Print object, you may only print the object, although in some cases, the object may be cut around. See Cutting Around

zObjects on page 10-9 to learn how to cut around a print object.

If you choose Cut out object, the object may only be cut out, and not printed.

10-4°Creating Cut Out Objects