Brady label maker manual Set custom width

Set custom width

Check this option to set a custom label width. Enter the new width in the entry field. The value entered must be less than the maximum printable width appropriate for the installed tape, because unlike the default width, this value indicates the total output width, with no margins applied. This means that the printable area will equal the amount you specify here. (See Checking Size on page 11-11 for more discussion on this topic.)

With the Monocolor and the Multicolor systems, the label prints with dashed lines that indicate the label’s dimensions.

With the Color & Cut system, the label is cut around its outside dimensions.

Note: Objects previously placed on the label keep their original size when you resize a label using this feature. You must manually resize any objects that no longer fit within the new label size. For information on resizing objects, see Sizing Objects on page 7-27.

This option is not available when Match tape width is enabled. When Match tape width is enabled, the value in this field shows the current width of the label for display only.

6-30°Changing Labels