
3.Choose a connection type. If your PC does not have a USB connector, choose serial.
4.Choose a purpose option to indicate the reason you are putting the system on line. You can change this option when and if you want to use the connection for the other purpose.
Note: You’ll also use the Transfer files option to upgrade the operating system for your printer. See Transferring Files from a PC on page
5. Choose OK. You’ll be returned to the Main Menu screen.
Connecting your system and a PC
In this procedure, you make the actual connection between the PC and your printer.
To place your label printing system on line
1.Connect one end of the cable to your label printing system and the other to a PC. The cable you use, USB or serial, should be same as you used in the procedure described in Setting Up Your System as a Hardware Device on page
2.Turn on your printing system.
3.Choose the On Line button on the Main Menu screen (Figure
Connecting to a PC