Brady label maker manual Multiple labels on a, Sample short label

than the two inch (51mm) minimum page length, the label and page print like this:

Your actual label length

System shears here

A single page

Figure 11-1. Sample short label.

Note: The label length and shear lines in Figure 11-1 are shown to illustrate the concepts discussed here. Those lines will not display on your screen.

Since two inches (51 mm) is the minimum supply length the system permits for reliable delivery of a label, the shear cut is at two inches, although your label is only one inch long. (You will need to trim the excess supply by hand.) See Checking Length on page 11-12 for more information.

Multiple labels on a page

You may print multiple labels on a single page when the Supply saver option on the Printing tab of either the System Setup screen or the Preferences screen is enabled. (See Supply saver option on page 11- 22 for more information.)

Printing °11-3