Canon CR-1 MARK II Before calling the service technician Warning, module id, message id, Message

8. Before calling the service technician (Warning)

module id	message id	Message	Detail
	104	Enter User ID/Password.	When logging in, input the user ID and password.
	105	Enter in alphanumeric.	Input the user ID/password in single-byte
10011			alphanumeric characters.
		Application will be closed.	To check the details of the transfer error, click
	109	Press Cancel button and log in to the application to
		view the details of the transfer error.	[Cancel], and then log in.
		Image can be captured but the storage space for	Delete studies in the study log screen to increase the
10012	28	captured images runs short.
		Make up space in the drive by deleting studies in	amount of available space in the drive.
		Study Logs List.
	50	Images stored for more than the specified periods	To delete the image, click [OK].
		will be deleted.
	66	All the studies will be closed and the current user	To log off, click [OK].
10013		will be logged off.
	85	Application cannot be terminated during transfer.	Close all studies after transfer, then exit the
			software.
	86	All the studies will be closed and then the	To end the study and exit the software, click [OK].
		application will be.
		A study with same Accession No. or Patient ID is	To start as a new study, click [YES].
	10	now in progress.
10019		Do you want to create a new study ?
		A study with same Accession No. or Patient ID is	To update the study information, click [YES].
	12	now in progress.
		Do you want to update ?
	1000	No Storage Selected	Select the storage, and then transfer the image.
		Image(s) will not be transferred.
10020
		Transfer for this study is in progress.	Wait until the transfer is completed before
	1001	You can't transfer it before the transfer is
			performing the transfer.
		completed.
	1	Invalid Values for Birth Date	Input the correct birth date.
	5	Patient Info. set as any of essential data items are	Input the required item that is displayed.
		not entered.
		The length of either of 5 Patient Name fields is too
	6	long.	Shorten the length to 60 characters or less.
		Shorten the length to 60 characters or less.
	12	Invalid character was entered to the field.	Re-input the data based on the information displayed
			in [Details].
	14	Line feed code cannot be entered to Study	Delete the line feed code.
		Description field.
		Too Long Patient Name.	Input the Patient name in 60 characters or less for all
	15	Shorten the total length of the 5 items to 60
			five items total.
		characters or less.
10023	16	Length of Accession No. exceeds the limit.	Input within the limited length.
	17	A character/characters for Accession No. is/are not	Input using the designated input character type or
		supported by Acceptable Character Set or Specific	specific character set.
		Character Set.
	18	Length of Patient ID exceeds the limit.	Input within the limited length.
		A character/characters for Patient ID is/are not
	19	supported by Acceptable Character Set or Specific
		Character Set.	Input using the designated input character type or
		A character/characters for Study Description is/are	specific character set.
	21	not supported by Acceptable Character Set or
		Specific Character Set.
	22	Character '\' or control character cannot be used for
		Accession No.
			Delete the backslash (\) and any control characters.
	23	Character '\' or control character cannot be used for
		Patient ID.

-118-