Canon CR-1 MARK II Before calling the service technician Warning, module id, message id, Message

8. Before calling the service technician (Warning)

module id	message id	Message	Detail
	4	Character '\' or line feed code cannot be used for	Delete the backslash (\) or line feed code.
		Study Description.
10024	11004	A character/characters for Study Description is/are	Input using the specific character set.
		not supported by Specific Character Set.
	11005	One or more studies are in progress.	End the study.
	12001	Number of selected images is not two.	Select two images.
	102	Enter essential data.	Input the required items.
		[item]
	103	Enter in alphanumeric except '\'.
		[item]
10026			Delete the backslash (\).
	104	Character '\' cannot be used.
		[item]
	105	A character/characters is/are not supported by the	Input using the specific character set.
		specified character set.
	1001	No default is registered.	When a storage has been registered, check “Set as
			Default Storage” for one of the storages.
		Length for a storage path exceeds the maximum.	Select a folder where the number of characters for
	1101		the Image Storage Directory (Folder) (see
		[Max. ***]
			page 80) is fewer than 150 characters.
	1102	Enter essential data.	Input the required items.
		[item]
	1103	Enter in alphanumeric.	Use alphanumerics for the input.
		[item]
	1104	Enter in numeric.	Use numerics for the input.
		[item]
10027	1105	Duplicated Storage Name	Change the Storage Name.
	1106	Entered value exceeds the limit.	Set to a value which does not exceed the input limit.
		[item (*** - ***)]
	1107	Entered value could not be checked.	Use alphanumerics for the input.
			• Check that the storage server is operating
	1110	Association with Storage Server was rejected.	properly.
		Check the settings and status of Storage Server.	• Check the settings on the Create a New Storage
			screen (see page 92).
	1111	Enter in alphanumeric except '\'.	Delete the backslash (\).
	1401	Storage will be deleted from the list.	To delete the storage, click [OK].
	2001	Number of selected storages exceeds the	Up to two storages can be checked for “Set as
		maximum.	Default Storage.”
	104	User will be deleted.	To delete the user, click [OK].
	202	No Essential Data	Input the required items.
	203	Enter in alphanumeric.	Use single-byte alphanumerics for the input.
	204	Character '\', '=' or control code cannot be used.	Delete the backslash (\), equal sign (=) or control
		[item]	code.
	205	Wrong Confirmation Password.	Input the same characters as for Password into
		Enter the password again.	Password(confirm).
10028	207	A character/characters is/are not supported by the	Input using the specific character set.
		specified character set.
	302	Character '\', '=' or control code cannot be used.	Delete the backslash (\), equal sign (=) or control
		[item]	code.
	305	A character/characters is/are not supported by the	Input using the specific character set.
		specified character set.
	402	No Essential Data	Input the required items.
		[item]
	403	Enter in alphanumeric.	Use alphanumerics for the input.
		[item]

-120-