Canon CR-1 MARK II Starting up and exiting the software, Starting up the software and logging in

3.Starting up and exiting the software

3.1Starting up the software and logging in

Note: Before proceeding, log in as a user who has an appropriate access rights in Windows. For details, refer to (2) in 2.1 Software (see page 3).

Check that the power of the retinal camera is on, and either double-click the Canon CR-1 Mark II icon on

the desktop or from the taskbar click [Start] > [All Programs] > [Canon Retinal imaging control

software NM] > [Canon CR-1 Mark II] in this order. The login screen will appear.

Login screen

Objective	Operation	Reference chapter
		and page
Performing	Input the User ID and Password, and click [Login].	4. Performing
	The main screen is displayed.
studies	User ID distinguishes neither upper-case letters nor lower-	studies (see page 9)
	case letters.
	Input the User ID and Password with which the Privilege
	(see page 100) has been set to the Administrator, and	7. Settings (see
Setting the	click [Settings].
software	The setting screen is displayed.	page 73)
	User ID distinguishes neither upper-case letters nor lower-
	case letters.
Exiting the	Click [Exit].	3.2 Exiting the
	However, it cannot be clicked while images are being	software (see
software
	transferred.	page 8)

-7-