Canon CR-1 MARK II operation manual Worklist tab

7.Settings

7.5.5Worklist tab

This screen is displayed when the Worklist tab is clicked.

Worklist tab screen

7.5.5.1 Setting the display items

1	Select the items to be displayed on the Worklist tab (see page 19).
2	To add or delete a display item, select the item, and then click		or	.
	Set the display sequence of the Displayed Items.
	The items on the Displayed Items appear from the left of the list in sequence from the top.
	To change the display sequence, select the item, and then click [Up] or [Down].
7.5.5.2 Performing the Worklist Server Settings
1	Set the communication parameters.
	Item	Operation
	Server AE Title	Input the title using not more than 16 single-byte alphanumerics and
		symbols. (Required)
		The backslash (\) cannot be input.
	Host Name	Input no more than 32 characters for the IP address or host name. (Required)
	Port No.	Input a number from 0 to 65535 as the port number. (Required)

2	Check the connections with the server.
	Click [Connection Check...].
	If the connections have been made properly, the Information screen is displayed.
	When [OK] is clicked, the Information screen is closed.

Information screen

-88-