Canon CR-1 MARK II Before calling the service technician Warning, module id message id, Message

8. Before calling the service technician (Warning)

module id message id	Message	Detail
7	Entered Model No. is not numeric or the value is	Set the model number to a number from 1 to 99.
	out of the range between 1 and 99.
8	Length for storage path for the study file is too	Set the length of the storage path to less than 80
	long. Shorten to less than 80 bytes.	bytes.
22	Character '\' or control character cannot be used for	The study information in the study file (ccrhis.his) is
	Accession No.
		invalid. Delete the backslash (\) and any control
	Character '\' or control character cannot be used for
23		characters.
	Patient ID.
	Character '\,' line feed code, or control character	The study information in the study file (ccrhis.his) is
24		invalid. Delete the backslash (\), line feed code, and
	cannot be used for Study Description.
		any control characters.
	Character '\', '^' or control code cannot be used for	The study information in the study file (ccrhis.his) is
25		invalid. Delete the backslash (\) and any control
	Patient Name.	characters.
26	Multi-byte character cannot be used for Patient	The study information in the study file (ccrhis.his) is
	Name.	invalid. Delete the multi byte characters.
	Character '\', '^' or control code cannot be used for	The study information in the study file (ccrhis.his) is
29		invalid. Delete the backslash (\) and any control
10049	Referring Physician.	characters.
39	Out-of-Range Birth Date (A date earlier than 1869	The study information in the study file (ccrhis.his) is
	or later than tomorrow is entered.)
		invalid. Input the correct birth date.

40Entered date is invalid for Birth Date.

41A character/characters for Patient ID is/are not supported by Specific Character Set.

	42	A character/characters for Accession No. is/are not	The study information in the study file (ccrhis.his) is
		supported by Specific Character Set.	invalid. Input using the specific character set.
	43	A character/characters for Patient Name is/are not
		supported by Specific Character Set.
		Entered characters are not acceptable because they	The study information in the study file (ccrhis.his) is
	44		invalid. Delete the single-byte Japanese kana
		do not match Specific Character Set.	characters.
	45	A character/characters for Referring Physician is/
		are not supported by Specific Character Set.	The study information in the study file (ccrhis.his) is
			invalid. Input using the specific character set.
	46	A character/characters for Study Description is/are
		not supported by Specific Character Set.
	52	Folder for study file is not set.	Specify the folder to save the study file (ccrhis.his).
		Length value for Accession No. of Input	Set the length limitation of the Accession No. to 16
	2	Restrictions is not numeric or is not in the range of
			digits or less.
		1 to 16.
	3	Character set for Accession No. is not specified.	Specify the input character type.
	6	Length value for Patient ID of Input Restriction is	Set the length limitation of the Patient ID to 64
		not numeric or is not in the range of 1 to 64.	characters or less.
	7	Character set for Patient ID is not specified.
	10	Character set for Patient Name is not specified.	Specify the input character type.
10050	11	Character set for Study Description is not
		specified.
	13	Starting Value is not numeric or out of range.	Set the Starting Value using a number in the correct
			range.
	15	Total length of Starting Value and Accession No.	Adjust the length of the header string to set the total
		Header String exceeds the limit.	length of the starting value and header string within
			the length limitation.
	16	Counter value is set to 1.	Check the value of the counter.
	17	Header String for Patient ID exceeds the	Set the length of the Header string within the length
		maximum length.	limitation.

Continued on the following page >>

-123-