Canon CR-1 MARK II operation manual Before calling the service technician Warning

		8. Before calling the service technician (Warning)
module id	message id	Message		Detail
	404	Wrong Confirmation Password.	Input the same characters as for Password into
		Enter again.	Password(confirm).
	502	No Essential Data	Input the required items.
		[item]
	503	Enter in alphanumeric.	Use alphanumerics for the input.
		[item]
10028
	504	Wrong Old Password.	Input the registered password.
		Enter the password again.
	505	Wrong Confirmation Password.	Input the same characters for New Password and
		Enter the password again.	New Password(confirm).
	508	New password is the same as the old password.	Do not input the Current Password as the New
		Enter again.	Password.
		Invalid Module File Combination.	When the MPPS tab (see page 91) has been set, set
10031	11	To use the MPPS module, enable the worklist
			the Worklist tab (see page 88) as well.
		module.
10033	201	Print Adjustment parameters will be updated.	To update the parameters, click [OK].
		Association with MPPS Server was rejected.	• Check that the MPPS server is operating
	9		properly.
		Check the settings and status of MPPS Server.
			• Check the MPPS tab (see page 91) settings.
		Invalid Server AE Title
	10	Check that valid characters are entered for AE
10044		Title.
		Invalid Server Host Name	Check the MPPS tab (see page 91) settings.
	11	Check that valid characters are entered for Host
		Name.
		Invalid Port Number
	12	Check that a numeric within the range between 0
		and 65535 is entered.
		Association with Worklist Server was rejected.	• Check that the worklist server is operating
	7		properly.
		Check the settings and status of Worklist Server.
			• Check the Worklist tab (see page 88) settings.
	8	Specified value for Time is out of range.
		Enter a value between 1 and 24.
	9	Specified Range of Date are out of range.
		XXXXX - XXXXX
			Refer to 7.5.5.3 Setting the search conditions
		Specified Range of Days are out of range.
	10		(see page 89).
		Enter values between 0 and 999.
		Invalid Worklist Search Interval.
	11	Check that a numeric within the range between 0
		and 60 is entered.
		Invalid Server AE Title
	12	Check that valid characters are entered for AE
10045		Title.
		Invalid Server Host Name	Refer to 7.5.5.2 Performing the Worklist Server
	13	Check that valid characters are entered for Host
			Settings (see page 88).
		Name.
		Invalid Port Number
	14	Check that a numeric within the range between 0
		and 65535 is entered.
		Invalid Search Condition Value(s)
	16	Selected item has an invalid character or the length	Refer to 7.5.5.3 Setting the search conditions
		is too long.	(see page 89).
		[XXXX] (DICOM TAG Name+DICOM TAG
		Number)
		The same DICOM tag is already set up for Search	It is not possible to register a multiple number of the
	18	Conditions.
		[XXXX] (DICOM TAG Number+DICOM TAG	same DICOM tag.
		Name)
				Continued on the following page >>

-121-