2. Notes on use
(13)Properties settings for the EOS digital camera
To prevent a wizard or menu opening when the EOS digital camera is connected, perform the procedure below.
Windows Vista:
1)Open the Control Panel, and click Hardware and Sound, and click Play CDs or other media automatically.
2)Select “Take no action” from the
Windows XP:
1)Select Scanners and Cameras in the Control Panel.
2)
3)Click the Events tab and select “Take no action”, then click [OK].
2.2Digital camera settings
(1)This software can only be used for digital cameras that were set by service personnel at installation. For details on the supported digital camera and to change the digital camera that is used, please contact a Canon representative or distributor.
(2)The settings may vary depending on the digital camera model.
(3)Do not make any improper changes to the digital camera settings. If the proper settings are not made, the camera may be unable to take images. After changing the settings, turn off the power switch to the digital camera to save the settings.
Setting example (EOS 50D)
For details on settings, see the EOS 50D Instruction Manual.
Note: Items listed as “Auto” in the Remarks column are automatically set by this software. Items listed as “Required” show items where retinal images cannot be taken unless the settings are made as indicated.
Items listed as “Recommended” are settings recommended by Canon. The customer should act responsibly when making setting changes.
Basic settings
Item | Settings | Remarks |
|
|
|
|
|
|
Shooting mode | M (Manual exposure) | Auto |
|
|
|
Drive mode | (Single shooting) | Auto |
|
|
|
White balance | (Flash) | Auto |
|
|
|
Shutter speed | 60 (1/60 sec) | Auto |
|
|
|
ISO speed | 1600 • 3200 • 6400 | Auto |
|
|
|
Continued on the following page >>
