Canon CR-1 MARK II operation manual

6. Main screen operations

5

6

Draw a cup.

Select [Cup] and draw using the same procedure for Disc.

Reshape the disc or cup.

After drawing is completed, the shape can be adjusted.

If the pointer is brought close to the clicked point, the color of the point changes to gray.

The point can be dragged to move it to another location. However, it cannot be moved over points that are already plotted.

To edit the drawn line, right-click over a point or line. A red point is displayed on the line.

Right-click menu item	Description
Form a Shape	Select this item to connect the points and draw a closed curve.
Insert the Dot	Select this item to insert a new point and reshape the drawing.
Delete the Dot	Select this item to delete a selected point and reshape the drawing.

7	The C/D ratio is displayed.
	Even when reshaping of a cup or disc, the C/D ratio is calculated and displayed to two decimal
	places.
	In images where it is already calculated, the previously-calculated value is displayed.
	Display item	Description
	Area	Ratio of the cup area and disc area
	Vertical	Ratio of the heights when drawing is bound by a rectangle
	Horizontal	Ratio of the widths when drawing is bound by a rectangle
8
	Save the values and exit the measurement.
	Click [OK].
	The Cup and Disc drawing colors and measurement values of the C/D ratio are saved, and the screen
	is closed.

Note: Drawing information (points and lines) for the Area and Line ratio measurement will be lost when the C/D Ratio screen is closed.

-56-