Canon CR-1 MARK II Settings When the Warning screen is displayed, Setting the search conditions

7. Settings

When the Warning screen is displayed

Check out the following when the Warning screen is displayed.

•Is the network operating properly?

•Is the server working properly?

7.5.5.3Setting the search conditions

Take the steps below to set the default values of the Worklist Search screen (see page 20).

1	Click [Search Conditions...].
	Search Conditions screen is displayed.

2	Set the Search Conditions : Date.
	Select the date search condition, and input the condition.
	Based on the input condition, studies with the Scheduled Procedure Step Start Date (0040,0002) or
	Scheduled Procedure Step Start Time (0040,0003) are searched.
	If no conditions have been input, the search conditions will not be set.
	Item	Operation
	Time	The search is conducted using the range which has been set with the current
		time serving as the reference.
		Input a number from 1 to 24.
	Range of Date	The search is conducted using a period extending from the start date to the
		end date.
	(MM/DD/YYYY)
		Select the dates in the range extending from 1/1/1870 to 12/31/9999.
	Range of Days	The search is conducted using the range which has been set with the current
		date serving as the reference.
		Input a number below 999.

Continued on the following page >>

-89-