Canon CR-1 MARK II operation manual Before calling the service technician Warning

8. Before calling the service technician (Warning)

module id	message id	Message	Detail
	25	Required fields must be entered.	Input the required items.
		[item]	The titles of the required items are indicated in blue.
		The path for storage directory exceeds the	Select a folder where the path for the Image Storage
	26	maximum length.	Directory (Folder) (see page 80) is fewer than 150
		[Max. *** bytes]	bytes.
	27	Storage directory does not exist.	Check that the storage directory (see page 80)
			which has been set actually exists.
	28	Drive specified for storage directory (folder) is not	Set the storage directory (see page 80) on the fixed
10004		a fixed disk.	disk.
		Insufficient Free Space in Storage Directory	Increase the amount of free memory on the fixed
	30		disk on which the storage directory has been set
		[** GB]
			(see page 80).
	43	Character ' ' cannot be used.	Do not input spaces for the tags and separators of the
			Image Comment Settings screen (see page 98).
			Upgrage the version of the Retinal imaging control
	4105	Failed to read the external study.	software NM (CR-1 Mark II) to the same version as
			that you used to save the file, or to a newer version.
	103	Over Discharge	Wait for a few moments, and then take the images.
		Do not operate the retinal camera for a while.
	104	EOS Digital camera is not mounted.	Mount the digital camera on the retinal camera.
		Mount the camera or select Sub Camera mode.
	107	Communication Port Error	• Turn the retinal camera’s power off and back on.
	108	Communication Protocol Error	• Turn the computer’s power off and back on.
		Photography frequency exceeded the limit.	Images cannot be saved since images were taken
	109		continuously over a short period of time.
10005		Please wait.
			Wait for a few moments, and then take the images.
	201	Mirror Drive Error in EOS Camera Mode	Turn the equipment’s power off and back on, and
			take a test image.
	202	X-contact Error in EOS Camera Mode
			Do not press the shutter release button of the retinal
	204	Retinal camera was operated in Idle mode.	camera while the photography ready lamp is not
			lighted up green.
	205	Flash Not Fired	Turn the equipment’s power off and back on, and
	206	X-contact Error in EOS Camera Mode	take a test image.
			To return the current settings to the default values,
	1000	Default QA parameters by mode will be changed.	click [OK] on the QA (Quality Assurance) screen
			(see page 65).
			To delete the current QA parameter set to the default
	1001	Selected QA parameter set will be deleted.	value, click [OK] on the QA (Quality Assurance)
10006			screen (see page 65).
	1002	Current QA parameter values will be applied to all	To apply the current settings to all the selected
		the selected images.	images, click [OK] on the QA (Quality Assurance)
			screen (see page 65).
			To overwrite the QA parameter set with the current
	1003	Selected QA parameter set will be updated.	settings, click [OK] on the QA (Quality Assurance)
			screen (see page 65).
		Invalid Image Comments
	1000	A character/characters for Image Comments is/are	Delete any control characters.
10009		not supported by Specific Character Set.
		Invalid Image Comments
	1001	A character/characters for Image Comments is/are	Input using the specific character set.
		not supported by Specific Character Set.
		A character/characters for User Name is/are not
10010	8	supported by Specific Character Set.	Input the user name using the specific character set.
		Change the user name.

Continued on the following page >>

-117-