Canon CR-1 MARK II operation manual Ending a study and transferring images

4. Performing studies

4.5Ending a study and transferring images

4.5.1Ending a study

1End the study.

Click [Study Complete]. The Study Complete screen is displayed. To end the study, click [OK].

To select the storage, follow the steps described below.

Study Complete screen

When [Study Cancel] is selected

When [Study Cancel] is clicked, the Study Cancel screen is displayed.

If [OK] is then clicked, the study is ended without saving the images which have been taken.

Study Cancel screen

Study Complete and Study Cancel

The same operation can be performed by selecting [Study] > [Study Complete F12] or [Study]

>[Study Cancel] from the menu bar.

When a study is started without opening the Study Input screen

When a study is started without opening the Study Input screen, click [Study Complete] to display the Study Input screen. Refer to 4.2 Inputting the study (see page 10), and input the study information.

Continued on the following page >>

-25-