Citrix Systems CITRIX NETSCALER 9.3 manual Configuring HTTP Profiles, 1. Built-in HTTP Profiles

Chapter 5 Advanced Configurations

To modify the band range by using the configuration utility

1.In the navigation pane, expand System, and then click Settings.

2.In the details pane, under Settings, click HTTP data band Statistics. Do one or both of the following:

•To modify the band range of HTTP request statistics, click the Request tab,

click the Request tab, and then click Configure. In Change HTTP Request Band Size dialog box, enter a value (for example, 300) in Request Data Band Size text field, and then click OK.

•To modify the band range of HTTP response statistics, click the Response tab, and then click Configure. In Change HTTP Response Band Size dialog box, enter a value (for example, 2048) in Response Data Band Size text field, and then click OK.

3.Click Close.

Configuring HTTP Profiles

An HTTP profile is a collection of HTTP parameter settings that can be applied to virtual servers and services. An HTTP profile can be reused on multiple virtual servers or services.

You can use built-in HTTP profiles or configure custom profiles. The following table describes the built-in HTTP profiles.

Table 5-1.Built-in HTTP Profiles

Built-in profile	Description
nshttp_default_strict_validation	Settings for deployments that require
	strict validation of HTTP requests and
	responses.
nshttp_default_profile	The default global HTTP settings for the
	NetScaler appliance.

To add an HTTP profile by using the NetScaler command line

At the NetScaler command prompt, type:

136