Citrix Systems CITRIX NETSCALER 9.3 manual Binding the Audit Policies Globally, w sh system global

Chapter 3 Audit Logging

To configure an audit server policy

1.In the navigation pane, expand System, expand Auditing, and then click Policies.

2.In the details pane, on the Policies tab, do one of the following:

•To create a new policy, click Add.

•To modify an existing policy, select the policy, and then click Open.

3.In the Create Auditing Policy or Configure Auditing Policy dialog box, specify values for the following parameters, which correspond to parameters described in "Parameters for configuring auditing policies" as shown:

•Name* ─ name

•Server* ─ action

*A required parameter

4.Click Create or OK, and then click Close.

A message appears in the status bar, stating that the auditing policy has been configured successfully.

Binding the Audit Policies Globally

You must globally bind the audit log policies to enable logging of all Citrix® NetScaler® system events. By defining the priority level, you can set the evaluation order of the audit server logging. Priority 0 is the highest and is evaluated first. The higher the priority number, the lower is the priority of evaluation.

To configure a SYSLOG policy by using the command line

wbind system global [<policyName> [-priority <positive_integer>]]

wsh system global

Example

>bind system global nslog-pol1 -priority 20 Done

>sh system global

1)Policy Name: nslog-pol1 Priority: 20

2)Policy Name: syslog-pol1 Priority: 50

3)	Policy Name: nslogpol9	Priority: 100
Done

Parameters for binding the audit policies globally

policyName

The name of the NSLOG or SYSLOG policy.

78