
Citrix NetScaler Administration Guide
Audit server commands
audserver
audserver
audserver -remove
Specifies
Start the audit server logging service, when you enter this command at a command prompt.
You can also start audit server logging from Start > Control Panel > Services.
Note: Audit server logging starts by using the configuration settings in the configuration file, for example, auditlog.conf file specified in the audit server install option.
Stop audit server logging.
Removes the audit server logging service from the registry.
Run the audserver command from the directory in which the audit server executable is present:
wOn Windows: \ns\bin
wOn Solaris and Linux: \usr\local\netscaler\bin
The audit server configuration files are present in the following directories:
wOn Windows: \ns\etc
wOn Linux: \usr\local\netscaler\etc
The audit server executable is started as ./auditserver in Linux and FreeBSD.
Adding the NetScaler Appliance IP Addresses on the NSLOG Server
In the configuration file (auditlog.conf), add the IP addresses of the NetScaler appliances whose events must be logged.
To add the IP addresses of the NetScaler appliance
At a command prompt, type the following command: audserver
<directorypath>: Specifies the path to the configuration file (auditlog.conf).
87