Citrix Systems CITRIX NETSCALER 9.3 To add a TCP profile by using the NetScaler command line

Citrix NetScaler Administration Guide

Built-in profile

nstcp_default_tcp_lan

nstcp_default_tcp_lfp_thin_stream

nstcp_default_tcp_lnp_thin_stream

nstcp_default_tcp_lan_thin_stream

nstcp_default_tcp_interactive_stream

nstcp_internal_apps

nstcp_defualt_profile

Description

This profile is useful for back-end server connections, where these servers reside on the same LAN as the NetScaler appliance.

This profile is similar to the

nstcp_default_tcp_lfp profile; however, the settings are tuned for small size packet flows.

This profile is similar to the

nstcp_default_tcp_lnp profile; however, the settings are tuned for small size packet flows.

This profile is similar to the

nstcp_default_tcp_lan profile; however, the settings are tuned to small size packet flows.

This profile is similar to the

nstcp_default_tcp_lan profile; however, it has a reduced delayed ACK timer and ACK on PUSH packet settings.

This profile is useful for internal applications on the NetScaler appliance (for example, GSLB sitesyncing). This contains tuned window scaling and SACK options for the desired applications. This profile should not be bound to applications other than internal applications.

This profile represents the default global TCP settings on the NetScaler appliance.

To add a TCP profile by using the NetScaler command line

At the NetScaler command prompt, type the following commands to add a TCP profile and verify the configuration:

139