Citrix NetScaler Administration Guide
Example
>add appflow action
Done
>show appflow action
1)Name:
Collectors:
Hits: 0
Action Reference Count: 2
2)Name:
Collectors:
Hits: 0
Action Reference Count: 1
3)Name:
Collectors:
Hits: 0
Action Reference Count: 1
Done
To modify or remove an AppFlow action by using the NetScaler command line
wTo modify an AppFlow action, type the set appflow action command, the name of the action, and the parameters to be changed, with their new values.
wTo remove an AppFlow action, type the rm appflow action command and the name of the action.
Parameters for configuring an AppFlow action
name
A name for your new action, or the name of the existing action you want to modify. The name can begin with a letter, number, or the underscore symbol, and can consist of from one to 127 letters, numbers, and the hyphen
collectors
The name of a set of configured collectors.
comment
Any comments that you may want to associate with the policy. Maximum length: 255 characters. To include spaces in a comment that you type on the NetScaler command line, enclose the entire comment inside quotation marks. The quotation marks do not become part of the comment. They are not required if you use the configuration utility.
173
