Citrix Systems CITRIX NETSCALER 9.3 Parameters for configuring a user account, UserName User Name

Citrix NetScaler Administration Guide

> show system user

1)User name: nsroot

2)User name: user1

3)User name: johnd Prompt String: user-%u-at- %T Prompt Inherited From: User

Done

To modify or remove a user account by using the NetScaler command line

wTo modify a user's password, type the set system user <userName> command and the parameters to be changed, with their new values.

wTo remove a user account, type the rm system user <userName> command.

Parameters for configuring a user account

userName (User Name)

A name for the user. The name can begin with a letter, number, or the underscore symbol, and can consist of from 1 to 31 letters, numbers, and the hyphen (-), period (.), pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore (_) symbols.

password (Password)

A password that the user uses to log on.

promptString (CLI Prompt)

A name for the user’s NetScaler command-line prompt. The name can consist of letters, numbers, the hyphen (-), period (.) pound (#), space ( ), at sign (@), equals (=), colon (:), underscore (_) symbols, and the following variables:

w%u—Is replaced by the user name.

w%h—Is replaced by the host name of the NetScaler appliance.

w%t—Is replaced by the current time in 12-hour format.

w%T—Is replaced by the current time in 24-hour format.

w%d—Is replaced by the current date.

w%s—Is replaced by the state of the NetScaler appliance.

A maximum of 63 characters are allowed for this parameter. A variable (for example, %u) is counted as two characters. The resulting prompt can be longer than 63 characters.

timeout (CLI Idle Session Timeout (Secs))

Time-out value, in seconds, for inactive CLI sessions for a system user. If a user's CLI session is idle for a time that exceeds the time-out value, the NetScaler appliance terminates the connection.

23