Citrix Systems CITRIX NETSCALER 9.3 Modifying the Default Buffer Size, w sh weblogparam Example

Citrix NetScaler Administration Guide

Done

To enable or disable Web server logging by using the configuration utility

1.In the navigation pane, expand System, and then select Settings.

2.In the details pane, under Modes and Features, click Change advanced features.

3.In the Configure Advanced Features dialog box, select the Web Logging check box to enable the Web logging feature, or clear the check box to disable the feature.

4.Click OK.

5.In the Enable/Disable Feature(s) dialog box, click Yes. A message appears in the status bar, stating that the feature has been enabled or disabled.

Modifying the Default Buffer Size

You can change the default buffer size of 16 megabytes (MB) for Web server logging to suit your requirements. To activate your modification, you must disable and reenable Web server logging.

To modify the buffer size by using the NetScaler command line

At the NetScaler command prompt, type the following commands to modify the buffer size and verify the configuration:

wset weblogparam-bufferSizeMB <size>

wsh weblogparam

Example

>set weblogparam -bufferSizeMB 32

>sh weblogparam

Web Logging parameters:

Log buffer size: 32MB

Done

Parameter for modifying the buffer size

Buffer Size

Memory (in megabytes) allocated for buffering the HTTP and HTTPS request log entries before sending them to the NSWL client.

95