Compex Systems WPE53G manual Source IP, Destinatio, Port

Destination	Informs the host that a
unreachabl	datagram	cannot	be
e	delivered.
Source	Informs the host to lower the
quench	rate at which it sends
	datagrams	because	of
	congestion.
Redirect	Informs the host of a
	preferred route.
Time	Indicates that the Time-to-
exceeded	Live (TTL) of an IP datagram
	has expired.
Parameter	Informs that host that there
Problem	is a problem in one the
	ICMP parameter.
Timestamp	Information that is from the
Request	ICMP data packet.
Information	Information that is from the
Request	ICMP data packet.
Information	Information that is from the
Reply	ICMP data packet.

IGMP : This IP protocol is used to establish host memberships in particular

Types multicast groups on a single network. The mechanisms of the protocol allow a host to inform its local router, using Host

		Membership Reports.
		Host	Information that is from the
		Membership	IGMP data packet.
		Report
		Host	Information that is from the
		Membership	IGMP data packet.
		Query
		Leave Host	Information that is from the
Source IP :		Message	ICMP data packet.
		This parameter	allows you to specify workstation(s) generating
		the data packets. Users can either set a single IP address or set a
		range of IP addresses.
Destinatio	:	This parameter lets you specify the set of workstations that
n IP		receive the data packets. Users can either set a single IP address
		or set a range of IP addresses.
Source	:	You can control requests for using a specific application by
Port		entering its port number here. Users can either set a single port
		number or a range of port numbers.

Page 145