Compex Systems WPE53G Ensure that The Current Mode is set to Access Point, Select Act as RootAP

Follow these steps to change the setup the root access point.

Setup access point 1:

Click on WLAN Setup from the CONFIGURATION menu. You will see the sub-menus expanded under WLAN Setup. Click on Basic.

Ensure that The Current Mode is set to Access Point.

To change The Current Mode, please refer to: Common Configuration – WLAN Setup - To Configure the Basic Setup of the Wireless Mode.

Select Act as RootAP.

Select the Channel common to both access point 1 and access point 2.

Page 107