The access point can automatically calculate the values of the parameters to input based on the distance between your access point and the other wireless device. Enter the distance in meters and click on the Show Reference Data button.
You can enter the parameters based on the recommended values in the pop- up window, click on the Apply button to update the changes.
Long Distance | Description |
Parameters |
|
Outdoor | If set to Enable, the Outdoor parameters will be |
| configured for outdoor communication over short or |
| long distances as specified, it is disabled by default. |
|
|
Distance | Determines the distance between your access point |
| and the remote access point in meters. |
|
|
Slot Time | The amount of time is divided and each unit of time is |
| called one slot time. |
|
|
ACK Timeout | Determines the timeout allowed for the sending client |
| to receive the acknowledgment response from the |
| receiving client. If no acknowledgment packet is |
| received within this period, the sender will assume the |
| receiver has not received the packet and will attempt |
| to resend. |
|
|
CTS Timeout | |
| will wait for a CTS packet signaling that the channel is |
| idle and it can start data transmission. If no CTS packet |
| is received within this period, the sender will assume the |
| channel is busy and will wait before trying to send |
| again. |
|
|
Page 114
