This table describes the parameters that can be modified in DHCP Server Setup.

Parameters

Description

The fields DHCP Start IP Address and DHCP End IP Address fields allow you to define the range of IP addresses from which the DHCP Server can assign an IP address to the LAN.

DHCP Start IP Address

This is the first IP address that the DHCP server will

 

assign and should belong to the same subnet as

 

the access point. For example if the access point

 

IP address is 192.168.168.1 and the network mask is

 

192.168.168.1 and 255.255.255.0, the DHCP Start IP

 

Address should be 192.168.168.X, where X can be

 

any number from 2 to 254. It is pre-set to

 

192.168.168.100.

 

 

DHCP End IP Address

This is the last IP address that the DHCP server can

 

assign and should also belong to the same subnet

 

as your access point. For example if the access

 

point IP address is 192.168.168.1 and the network

 

mask is 192.168.168.1 and 255.255.255.0, the DHCP

 

End IP Address should be 192.168.168.X, where X

 

can be any number from 2 to 254. It is pre-set as

 

192.168.168.254.

 

 

Page 32

Page 38
Image 38
Compex Systems WPE53G manual 192.168.168.100