Setup 802.1x/RADIUS for Access Point
(Available in Access Point, Repeater and Gateway Modes)
At the IEEE 802.1x AP Setup page,
Step 1:
Key in the IP address of the Primary RADIUS Server in your WLAN. You can optionally add in the IP address of a Secondary RADIUS Server, if any.
The RADIUS authentication server MUST be in the same subnet as the access point.
Step 2:
By default, the value for Authentication Port number is 1812. You can leave this value as it is. This value must be set to be the same as the one in the RADIUS server.
Step 3:
By default, the value for Accounting Port number is 1813. You can leave this value as it is. This value must be set to be the same as the one in the RADIUS server.
Step 4:
Enter the Shared Secret Key in the field provided.
Step 5:
By default, the Broadcast Key Rotation is set as 600 seconds. You may leave this value as its default setting.
Page 131
